Print: Mirror
Temperature: 350°F (175°C)
Time: 20 sec.
Pressure: Heavy
Peel: Warm
Wash Temp: 105°F (40°C)

*We do not recommend using a Teflon or non-stick sheet when pressing this material* 

White or Light Colored

  • 100% Cotton
  • 100% Polyester
  • 50/50 cotton/poly (Some polyester garments may experience dye migration, prior testing should be conducted)

Accessories Required

Computer, Inkjet Printer, Heat Press

Printable side

The printable side (white matte coated side) where film peels off.

Trimming Your Image

The paper has a transparent polymer background. However, it is recommended you trim close to your image to reduce the polymer background even more. The trim does not need to be accurate. It is recommended to trim roughly 0.5 - 1.0 inches around your image.

Pressure Settings

To ensure that the coating has properly fused with the fabric, we recommend using maximum pressure. If this paper is applied with inadequate pressure, the transfer will not wash well.

Peeling

This paper is to be peeled hot. Peeling should occur immediately after pressing. Also, if you have difficulties peeling the backing off the shirt, while the fabric is hot, gently tug on the sides of the shirt. The backing will "pop" right out.

Wash Instructions

Wait 24 hours before washing. Machine wash using mild detergent. Do not use bleach or other aggressive cleaning agents. Cannot be dry cleaned. Wash temperature cannot exceed 105°F. To increase color vibrancy, it is recommended to iron the image after each launder.

Storage

Inkjet Light Pro has an indefinite shelf life when stored at room temperature. Keep away from direct heat, sunlight and humidity.