HPN Ceramic Sublimation Mug Instructions

Application Instructions

Mug Press:

Temperature: 385°F
Time: 190 seconds depending on artwork
Suggested settings for HPN Signature Series Mug Press. Actual settings required may vary depending on the heat press, artwork, and other factors

*Due to the physical nature of this material expanding under heat, it is recommended to use lower levels of pressure or pre-heating the substrate prior to application. This will help prevent too much force from being applied against the expanded surface during application.*

Shrink Wrap:

Temperature: 400°F

Time: 10-18 min depending on artwork

Suggested settings for HPN Shrink Wraps. The actual setting required may vary depending on the countertop oven and other factors.