The Paropy Image Trans Heat Transfer Paper is widely known as the premier brand in quality heat transfer paper. The excellent color vibrancy, soft hand feel, durability, fade resistance, peel resistance and crack resistance sets this transfer paper apart from others available in the market Suitable for dark colored fabrics made of cotton, cotton blend, as well as synthetic fibers (polyester, nylon, etc.) including Lycra. Perfect for our entire line of heat press machines!
Tips and Tricks for the Best Result:
- Transfer paper is intended for use cotton, cotton blend fabrics, polyester, nylon and Lycra.
- Print with a laser, non-oil printer only.
- Set printer quality to normal to photo image quality. Over saturating the ink will cause ink bleed during launder.
- Do not press the material using a Teflon or non-stick sheet.
- Stretch the transfer immediately after application to increase softness and durability.
- Do not wash the heat pressed item for 24 hours after application.
- Do not dry clean.
- Keep transfer paper in moisture resistant protective sleeve when not in use.
The HPN MyExpert Support guarantee is our commitment to Life Time Technical Support. No matter where you are in your products life cycle, we will be here to provide support to your product and make sure you are fully covered.
Often imitated, never duplicated; our dedicated team of technicians are capable of providing support to your product at any point of its life. Whether it be during the setup process or even years down the line where troubleshooting may be required, they'll have your back and provide a solution.
Our MyExpert Support will always be there for you so you can purchase with confidence!
Paropy LASER DARK OPAQUE Heat Transfer Paper Care & Instructions
Print: Right Reading
Temperature: 350°F (175°C)
Time: 30 sec.
Wash Temp: 105°F (40°C)
Shirt Colors: White and Light, Black and Dark Colors
*We do not recommend using a Teflon or non-stick sheet when pressing this material*
- 100% Cotton
- 100% Polyester
- 50/50 cotton/poly
Computer, Color Laser Printer, Heat Press. Cutter/Plotter Optional.
The printable side (white matte coated side) where film peels off.
You should always test cut prior to any production run. Remember cutter settings will need to be adjusted as your blade ages. For optimal cutting and weeding, maintain a line thickness of at least 1/8” for lettering & logos.
Use Gloss sheet for Gloss finish
Use Silicon sheet for Matte finish
Wait 24 hours before washing. Machine wash using mild detergent. Do not use bleach or other aggressive cleaning agents. Cannot be dry cleaned. Wash Temperature cannot exceed 105°F
CL Dark has an indefinite shelf life when stored at room temperature. Keep away from direct heat, sunlight and humidity.
Do not overheat as image and colors will become very dull. Overheating may also result in adhesion/wash problems.
Neenah Image Clip Laser Dark - 8.5" x 11" - 50 Sheets
Worked very well
Works great. Just had a tough time aligning my vinyl cutter to register exactly where to cut, but that's a machine issue.
Heat Press Buyer's Guide
Know what to look for when purchasing a heat press to meet your production needs.
Sublimation Buyer's Guide
We'll walk you through everything you need to know to pick the right printer system for you.