Paropy Inkjet Light PRO & Dark PRO 8.5" x 11" Heat Transfer Paper Combo - 100 Sheets
Why Choose HeatPressNation?
With over 15 years of experience, HeatPressNation has established itself as the trusted industry leader in heat transfer solutions, earning the confidence of thousands of satisfied customers.
Thank you for your submission!
We will get back to you soon.
The Paropy Image Trans Heat Transfer Paper is widely known as the premier brand in quality heat transfer paper. The excellent color vibrancy, soft hand feel, durability, fade resistance, peel resistance and crack resistance sets this transfer paper apart from others available in the market. Designed to transfer thin with virtually no visible background when imaged. Suitable for fabrics made of cotton, cotton blend, as well as synthetic fibers (polyester, nylon, etc.) including Lycra. Perfect for our entire line of heat press machines!
*Packaging may vary*
Includes:
- 50 sheets of Paropy Inkjet Light Pro
- 50 sheets of Paropy Inkjet Dark Pro
Tips and Tricks for the Best Result:
- Transfer paper is intended for use cotton, cotton blend fabrics, polyester, nylon and Lycra.
- Print with inkjet printer only.
- Set printer quality to normal to photo image quality. Over saturating the ink will cause ink bleed during launder.
- Do not press the material using a Teflon or non-stick sheet.
- Do not wash the heat pressed item for 24 hours after application.
- Do not dry clean.
- Keep transfer paper in moisture resistant protective sleeve when not in use.
Paropy INKJET LIGHT PRO Heat Transfer Paper Care & Instructions
Paropy INKJET LIGHT PRO Heat Transfer Paper Care & Instructions
Print: Mirror
Temperature: 350°F (175°C)
Time: 20 sec.
Pressure: Heavy
Peel: Warm
Wash Temp: 105°F (40°C)
*We do not recommend using a Teflon or non-stick sheet when pressing this material*
White or Light Colored
- 100% Cotton
- 100% Polyester
- 50/50 cotton/poly (Some polyester garments may experience dye migration, prior testing should be conducted)
Accessories Required
Computer, Inkjet Printer, Heat Press
Printable side
The printable side (white matte coated side) where film peels off.
Trimming Your Image
The paper has a transparent polymer background. However, it is recommended you trim close to your image to reduce the polymer background even more. The trim does not need to be accurate. It is recommended to trim roughly 0.5 - 1.0 inches around your image.
Pressure Settings
To ensure that the coating has properly fused with the fabric, we recommend using maximum pressure. If this paper is applied with inadequate pressure, the transfer will not wash well.
Peeling
This paper is to be peeled hot. Peeling should occur immediately after pressing. Also, if you have difficulties peeling the backing off the shirt, while the fabric is hot, gently tug on the sides of the shirt. The backing will "pop" right out.
Wash Instructions
Wait 24 hours before washing. Machine wash using mild detergent. Do not use bleach or other aggressive cleaning agents. Cannot be dry cleaned. Wash temperature cannot exceed 105°F. To increase color vibrancy, it is recommended to iron the image after each launder.
Storage
Inkjet Light Pro has an indefinite shelf life when stored at room temperature. Keep away from direct heat, sunlight and humidity.
