Siser ColorPrint PU Gloss Print & Cut Heat Transfer Vinyl

SKU: CPPU200501

Width: 20 inches
Length: 5 Yards
Sale price$52.00 USD

Found a Lower Price?

Open Video

Why Choose HeatPressNation?

With over 15 years of experience, HeatPressNation has established itself as the trusted industry leader in heat transfer solutions, earning the confidence of thousands of satisfied customers.


Siser Logo

HeatPressNation is proud to be a Siser Authorized Distributor.

Impress your customers with beautiful, vibrant graphics that are also lightweight and durable. Siser's ColorPrint PU is a thin, stretchable print and cut material available in two finishes for all your project needs! Choose from Color Print PU Matte or Gloss. Compatible with eco-solvent, solvent, and latex-based printers/cutters, Color Print PU creates great full-color graphics. ColorPrint PU is thin enough to provide a great hand and stretchable enough for most performance wear. Plus it's easy to use. Just print, cut, mask, and press!

ColorPrint PU is approximately 70 microns/2.8 Mils, and is a PU composition

Not compatible with Inkjet, toner, or sublimation printers.

10-25 yard option will be fulfilled as multiple 5-yard rolls.


Adheres To:
  • 100% Cotton
  • Poly / Cotton Blends
  • 100% Uncoated Polyester
  • Leather
  • Lycra / Spandex

Blade: 45° or 60°
Base: White
Thickness: 70 Microns/2.8 Mils
Actual Width: 19.66" or 29.5"
Backing: Polyester
Compatible Inks: Eco-Solvent, Solvent, & Latex
Finish: Semi-Gloss

Instructions Book Icon

Application Instructions

  • • Print, cut ,and weed your design.
    • Mask with TTD Easy Mask or TTD High Tack Mask
    • Preheat garment for 2-3 seconds
    • Cover design with Heat Transfer Cover Sheet
    • Apply design at 295°F / 146°C with medium pressure for 15 seconds
    • Peel carrier hot

Heart Lock Icon


  • Wait 24 hours before first wash
  • Machine wash warm with mild detergent
  • Do not dry clean
  • Hang item to dry
  • Do not bleach
  • Dry at normal setting

    Shopping Cart Icon

    Recommended Accessories

    The HPN MyExpert Support guarantee is our commitment to Life Time Technical Support. No matter where you are in your products life cycle, we will be here to provide support to your product and make sure you are fully covered.

    Often imitated, never duplicated; our dedicated team of technicians are capable of providing support to your product at any point of its life. Whether it be during the setup process or even years down the line where troubleshooting may be required, they'll have your back and provide a solution.

    Our MyExpert Support will always be there for you so you can purchase with confidence!

    Customer Reviews

    Based on 14 reviews
    Sophia Cortez
    The best

    Always on time and best price and amazing you tube videos. Thank you

    Yuri Iscoa
    Good quality

    Me encanta lo seguire comprando

    Amaia Akui
    Siser Colorprint easy

    I absolutely love your site! I will not order my siser color print easy anywhere else

    Tim Sprague AKA S4mxdotcom
    Improved over the original .

    We have been using the original Sublithin for a few years now and it is our favorite material for adding rider name,number and sponsor logos to sublimated polyester Motocross Jerseys. This new version has a black or dark grey back to it. I'm guessing it is to help block dye from bleeding through. And the other then we noticed right away was the print quality seems to be improved. The color on the first prints was noticeable richer , the black was the darkest ,blackest black I have seen printed on any of the Sublithin materials. And the other colors printed better too. It is early on in the first roll of this new version , but I think it will be our new go to material for sublimated polyester! It also seemed like it released from the liner a little easier too. We had a few small lines that were really too small , but I wanted to push and see how well it would last . So I made a couple transfer's that had lines about as thick as a line drawn with a fine point Sharpie marker. When weeding those small lines they came off the backing and were hard to get back in place. I have not tried to press those logos yet. We have had success with lines and fonts that thin and thinner on cotton/poly blends using other Siser materials so I figured I would see how the Sublithin worked. I'm not sure if the original would work any better or worse with these thin lines. I was impressed with the Siser soft opaque material and the super fine details I was able to print , then cut and weed and apply and have all of those small details stay on the shirt. Even the period that is in the line of text that is about as thick as 2 layers of posterboard , not foamboard its close to the size the , is on my keyboard!! Overall all of the SISer materials we have used work excellent for their intended substrate .

    You may also like

    MyExpert Support

    Recently viewed